Pixelated or broken appearance on screen

[bill1950]

These are the screen shots

 

[bill1950]

These are the screen shots

 

[bill1950]

These are the screen shots

Can’t get the screen shots to attach.

 

[bill1950]

Try again

 

[NormNess]

Have a question relating the image on my screen when flying mini over very wooded or highly brushy area or over grassy areas with trees bordering the field.
While searching for one of the RC pilots planes that he dumbed thumbed (and who hasn’t) I was searching in a heavily brushed area and noticed while searching with my gimbal at fully down that twice it gave me a screen with what looked like it was broken and frozen imag A lot like when satellite tv loses it signal. I put my gimbal up and it went back to normal. I have notice this a few other times while flying over a beach with very calm water and bright sand. I was about 120 ft up and 450 out. VLOS and no trees in the way. The trees are about 70 feet and I could clearly see the Mini2. I have flown this area a lot but never flown in this configuration of pointing straight down and doing a grid pattern search. Just wondering if this is normal with perhaps the screen having too much of the same territory while flying with the gimbal down. It is a little concerning Because you do lose orientation in this mode. Especially if the drone is further out. I know there are many tools to get your orientation, guess more of a nuisance then anything.
Just to note, I really didn’t note the altitude or distance in the other instances. Thanks as always with all the help I have received on my previous threads.

This happened to me too, but being a newbie, I was too panicked to notice the details of the Mini2 at the time...it lasted for approx. 30 seconds but it seemed like an hour!

 

[burma419]

The pixelated screen happens to me all the time. It has to do with the video transmission from the drone back to the controller. I use a Galaxy note 20 ultra which is more then capable of handling the video transmission. Recorded video on the SD card is perfect. Using the function button I drop the camera straight down and then back up to correct the pixelation. I know there is a video on YouTube by 51Drones discussing this issue.

 

[JCDiaz]

Hi Bill, did you get any clues, answers or solutions for this pixeling video issue? I was flying my Mini 2 recently and something very similar occured to me.
Regards
Juan

 

[bill1950]

Sorry Juan I have not gotten any solutions but as Burma419 said if I humble up and down it goes away. I honestly haven’t flown my mini2 for quite a whil, I bought an Air 2S and have been flying that almost exclusively. If you do find a solution, please post