Problem with video Mavic Pro 2

[SnowSkier]

As you can see, there is a problem on the image below. Everytime the AC is going down horizontally you can notice at end of the frame something like bars I dont know what it is...
Does someone had the same problem??
Can this be related with firmware update?
Everything else was perfect except for that image issue that I found on editing...

If someone had the same issue, please let me know.

Thanks

 

[Starz]

Visible to me, but unknown. You will need the help of some of the more knowledgeable pixel peepers. Sorry.

 

[SnowSkier]

Visible to me, but unknown. You will need the help of some of the more knowledgeable pixel peepers. Sorry.

Ok, thanks

 

[Mossiback]

Could be the SD card. It may not be able to record fast enough. It needs to be U3 rated.

 

[SnowSkier]

Could be the SD card. It may not be able to record fast enough. It needs to be U3 rated.

That crossed my mind too but, if I record in H.265 those "bars" don't show. They only show in H.264.

 

[SnowSkier]

Could be the SD card. It may not be able to record fast enough. It needs to be U3 rated.

It's a U3 Sandisk Extreme 64 GB and it works fine in other equipment I have...

 

[metamorpheu]

Do a speedtest on the card and see if it qualifies to record 4k. I've had some issues with some cards, although they claimed to have more speed that they actually do. If you use a mac try the blackmagic speed test

 

[SnowSkier]

Do a speedtest on the card and see if it qualifies to record 4k. I've had some issues with some cards, although they claimed to have more speed that they actually do. If you use a mac try the blackmagic speed test

Thanks, I'll try it