Small damage from a branch today, concerning?

[Tjololo]

I wanted to get a sanity check from the more knowledgeable people here. Was flying around some trees today and had a collision, broke a prop and hit the ground from about 20 feet up. When replacing the propeller, I noticed the top cover was detached at this point. Tried to snap it into place and it didn't want to go despite a decent amount of force. I don't want to crack the plastic, is this something I should be concerned about or is it minimal enough that it's not going to be a problem for a while? No other visible damage to the drone, I'm going to replace all the props just in case since some of them were nicked, but I just want to be sure. It's my first crash, flew alright afterwards so I don't think there's any serious damage.

 

[mavic3usa]

Based upon what information your shared (including the pic), if the drone flies without any additional problems, I'd say nothing to be concerned about.

 

[Cafguy]

Yep... I agree.....If it still flys fine then you should be just fine, fold the arm slowly and check for resistance ( a little is fine).
It may be tempting to loosen a screw to press the plastic back in place. If the Drone is under warranty don't touch the screws besides it won't harm anything like it is.