Hi there, I have been flying Litchi mission from a tall building (about 80m high) and got great results. I checked all my flights using Virtual Mission. Everything looked fine but I found the altitude is not reflecting the actual situation. The whole flight went up about 50m of what I intended. I reviewed the footage and tried to adjust it in Litchi but visualization in Vitual Mission showed part of the path submerged below sea level.
My question is: can I set the absolute altitude instead of relative altitude in Litchi? I checked "above ground" in Litchi and the difference is not significant. I started the waypoint flight at 90(90) but the drone started the mission from 90m above the roof of the building, not 10m above it.
My question is: can I set the absolute altitude instead of relative altitude in Litchi? I checked "above ground" in Litchi and the difference is not significant. I started the waypoint flight at 90(90) but the drone started the mission from 90m above the roof of the building, not 10m above it.