And from china and HK you can post an Elephant for free (arriving declared as a $10 spare part)!!!
Does shipping really cost that much from the US or is it the sellers?
Does shipping really cost that much from the US or is it the sellers?
And from china and HK you can post an Elephant for free (arriving declared as a $10 spare part)!!!
Does shipping really cost that much from the US or is it the sellers?
It's not a piece of plastic. It's carbon based.Flying High could do it much cheaper, it's such a light item, they could just send it in an envelope
Does the Royal Mail have a solution like Australia Post, this is actually quite economical to do it this way, I've bought heaps of things that don't ship to Australia or are too expensive to ship via the retailer.
ShopMate
Under this Shopmate method the Flyinghigh plate will cost me 80 aud delivered while directly from them it's 230 aud.
It's still too expensive as you say for a piece of plastic and you still need the P4P mount to put on it.
So the DJI official mount for the Mavic and Spark controllers is the cheapest and most efficient mount for the CS
At least until the CS DJGo4 app quits.It wouldn’t really matter if it’s obstrocuted or not. You have much more telemetry being displayed on the unit anyway.
Which it never does. The CS OS is built specifically for DJI Go.
I've noticed that, but the fan should keep it cool. With that, there should be a FW update for you to install.Don't be surprised it can happen, DJI Go 4 v 4.1.18 has locked up on my CS Ultra once, where I had to reboot the CS several times and had to fly back using the controller flight information and RTH while the reboot was happening.
I suspect the panel overheated and made the touch screen unresponsive
The DJI Go 4 v 4.1.18 makes the CS run very hot when other versions didn't and the heat will cause OS software problems
If my unit arrives with 4.1.15 on it, would it be advisable to hold off updating until a version later than 4.1.18 is available?I've noticed that, but the fan should keep it cool. With that, there should be a FW update for you to install.
If my unit arrives with 4.1.15 on it, would it be advisable to hold off updating until a version later than 4.1.18 is available?
Not that overheating is an issue when it's 5 below outside, of course.
Normally nobody...except when the CS either quits (a rare occurrence but apparently some have reported it happening), becomes disconnected, or otherwise fails. It does look like it'd be easy enough to simply pull towards the user and fly with the RC alone in those circumstances.I use the MavMount with my 7.85 - well balanced and unobstructed use of the RC controls. The LED on the RC is obscured but who needs that when all of the telemetry is displayed on the CS.
I have a 3rd party mount for my 7" Crystal Sky and Mavic. Where can I obtain the connecting cable as the short ones I have won't work. And does this cable connect to where my iPhone connected or to the USB port in front of the controller. Thanks
Polarpro have a new mount for the CS which appears to be the best of the bunch, half the price of a Mavmount, which is too expensive, considering that this one is aluminium too.
DJI CrystalSky - Mavic / Spark Remote Mount
View attachment 28479
Will this mount fit the other birds(in the phone holder) as Well as the osmo..Let me know if you have have any specific questions on it!
Happy to answer any questions!
-Jeff from PolarPro
It will for sure fit in the Spark Remote.Will this mount fit the other birds(in the phone holder) as Well as the osmo..