It was a trade for Quickshots. You can have one or the other, but not both!Anyone finding that airsense doesn’t work after the latest fw update?
I like how they to "live with this for a while"Looks like DJI thinks they “improved” AirSense and its current non working state is an improvement.
I hope you report that it is broken to DJI. The more that report, the better.I don't know how close they think a plane should be, but when I'm looking up and the plane passes DIRECTLY over the drone, I would think that would be close enough. Also had a Helecopter go right over the treeline in the opposite direction. No alert.
I absolutely don't want to be warned about every plane in the Raleigh area, but I am just outside RDU International airspace and Airplanes swing overhead fairly often and fairly low either to line up for landing or doing a go around. These wouldn't be below 1000 feet, but look **** low because of size.
It's the small airplanes cruising really low for whatever reason and helicopters absolutely at collision level altitude that I worry about. I was flying my Autel Evo 2 Pro last year over a Southeastern Seminary last year, at 220 ft. altitude (67 meters) when I heard, then almost immediately saw a Helecopter flying at similar altitude fly within perhaps 300 feet horizontally of my drone. 91 meters. I was so shaken, I packed up and went home.
That was when I began to value ADS-B or Airsense.
Please let us know! Thanks!I fly many construction sites near and adjacent to airports, and had turned it off due to nonstop alerts.
I am flying a job on airport property this weekend, will turn it back on and see what I get!
Thanks. That scenario should trip an alert if it is indeed working.I fly many construction sites near and adjacent to airports, and had turned it off due to nonstop alerts.
I am flying a job on airport property this weekend, will turn it back on and see what I get!
An airplane doing 180 mph covers a half mile in 10 seconds. At 120 mph it's 15 seconds.Not sure what the radius is for Airsense but when it worked (and before I turned it off) I found it alerted incessantly. I get it. LA is a busy place but unless an aircraft is within 0.5 miles and getting closer, there's no point in telling me about it.
Are you saying it won't silent for you after the previous (December 10th) update to V01.00.0400? Mine was working right up to January's V01.00.0500 update.Same here, not working since the last (2) updates