Mavic pro no picture

[brianklenhart]

i have no picture on my Mavic Pro and shows no SD card in setting any help would be appreciated I have updating the firmware on controller and drone as well but when i tried to refresh it in the go4 app it say failed. Could it be that I'm using a Motorola phone ? I've also tried 2 different SD cards still no pic its a brand new camera and circuit board installed hope that would fix problem but no help either.

 

[GFields]

Sounds like it could be a connectivity issue. Was the camera and circuit board installed by a professional?

 

[Starz]

Also the origin of the new camera may be part of the issue.

 

[howardK]

I had a similar issue with my M1P. I replaced the cable going from my controller to my phone and all was well. Try using the USB port on the controller and see if that makes a difference.

 

[Reginald E Johnson]

I had a similar issue with my M1P. I replaced the cable going from my controller to my phone and all was well. Try using the USB port on the controller and see if that makes a difference.

I use the one foot cords for my MP1! They work a lot better!

 

[dave canada]

transmission cable on the camera or the right ribbon from the controller to the core yours sounds like the ribbon to the core if it hasn,t already been done last thing i would try its kind of a pain

 

[brianklenhart]

Also the origin of the new camera may be part of the issue.

I

Also the origin of the new camera may be part of the issue.

I don't think so because it had the same issues before i changed the camera