- Joined
- Mar 15, 2018
- Messages
- 37
- Reactions
- 10
- Age
- 60
My Mavic Air is less than 24 hours out the box (has not flown at all yet) and I think I have a borked RC. Before I get bogged down with DJI support (not open yet) I just want to make sure I have not missed anything obvious. Out the box everything was fine. I charged everything up and after a read through the manuals, both online and the ones in the box had a wee play with the simulator mode and all was good (using the RC). The AC had done at least one f/w upgrade after switch on initially via DJIGo4.
One thing I had not done was have a look at Camera settings so later on I switched it all on again to have a look at this and it prompted me to do a f/w update on the RC.
It took less than a minute and appeared to complete successfully. Since then I have been unable to reconnect the RC to the AC. I checked the AC via DJI Assistant and it wanted to do a further f/w update so I let it do this in the hope it was just some incompatibility issue. But no, they still won't pair. I then read you can check/update the RC via the DJI Assistant oo, but when I plug the RC into my PC I get the USB connect then disconnect sound over and over and it never shows up in the DJI Assistant. I am thinking its faulty? Is there a resolution to this anyone is aware of. Otherwise will try connect DJI later this morning when I have time.
Thanks
Kenny
One thing I had not done was have a look at Camera settings so later on I switched it all on again to have a look at this and it prompted me to do a f/w update on the RC.
It took less than a minute and appeared to complete successfully. Since then I have been unable to reconnect the RC to the AC. I checked the AC via DJI Assistant and it wanted to do a further f/w update so I let it do this in the hope it was just some incompatibility issue. But no, they still won't pair. I then read you can check/update the RC via the DJI Assistant oo, but when I plug the RC into my PC I get the USB connect then disconnect sound over and over and it never shows up in the DJI Assistant. I am thinking its faulty? Is there a resolution to this anyone is aware of. Otherwise will try connect DJI later this morning when I have time.
Thanks
Kenny