Recent content by _seven

got a few month old Mavic 3 pro and it has been giving me a few abnormal codes under normal operation, from previous esc error before, now I have this Flight control system error. If the issue persists, contact DJI Support (Code: 161000AC) any one who encountered this issue? was flying indoors...

No. This is a bnew drone and havent seen that much action. All its flight are on a very favorable weather

Mavic 3 pro latest firmware paired with RC pro with latest FW as well. Was on a shoot earlier today and when I was about to launch, I armed the drone as usual and it shot off the air (like full throttle) then it shows an ESC error. Craft still flies normally after . Thing Is i cant trust...

I have a Freeze frame from video, like the last thing it sees before getting 'disconnected' colored "photo" of the live feed before disconnecting but the maps, moves so as the telemetry, really weird, i even tried to cancel rth, exited the app and reopen it and now have black screen while...

Hello, i;ve been using 2 sets of Mavic 3 (dual) for quite some time now and finally decided to pull the trigger on a Mavic 3 pro mainly because of the tele camera 10bit dlog M update im currently using the Mavic3p paired with my RC Pro, and been happy with it until yesterday, was doing some...

zooming in /out to compensate with the speedlost

been flying to track horse race as well, but from behind and from their side, not much we can do if the wind gust goes above 20mph the drone simply get left behind even in sports mode; , only thing i can do (since its a live feed) is to digitally zoom in to keep up with the horses i was using...

will pull the trigger and get one once i sell my other m3. will try to do a comparison but other YTbers with access to demo unit will surely beat me to it lol

Seems like theyre still using the same sensor . Only 5.1k 50 just like the old m3

one with at least 3 or 4x zoom and the other with 7x

seems like the 2 tele lens have 1 1/3 sensors, and dlog/hlg support,

hope they'll have a pro version of the app too.

Have you tried installing the old camera to check if everything still works (feed and all)? also the 'lego' style connector of the camera is a bit finicky to install, you really have to make sure that the entire connector is in.

the hole on top of the mavic 3 - although it's just there for cosmetics - is still made with 2 separate parts and has a tiny gap in between where water could sip in - below it is the GPS module

i do fly drones for a living and confident enough with my set of skills, i only turn on the 'display radar' for added awareness as some of my shoots require close proximities to objects. my sensors are clean all the way and it does detect real obstacles around, its just that it sometimes...