Recent content by Joe Horn

I might be wrong, but it looks like the infamous "jello effect" which is usually caused by vibrations in the drone causing a strobe effect with the video frame rate. If the vibration is caused by faulty props (or imbalanced props), an easy fix is to replace all 4 props with brand new ones...

Your "Expo" settings have probably gotten changed. In main DJI Fly screen, tap the three dots in the upper right corner, then select Control, then select Gain & Expo Tuning, and adjust all three flight modes to your liking. Hope that helps!

I agree with @MS Coast. 3 miles is not an exaggerated claim, because that assumes nighttime flying. It's normal to get less than 3 miles of visibility in twilight, and even less in daylight.

Count me in. I fly the Mini 3 Pro with the Integra goggles and the RC Motion 2. The upside is the "Death Star Attack Run Trench Dive" live experience, which is awesome. The downside is that I cannot switch back and forth between this setup and the normal DJI RC in the field, because I don't own...

Another option is AutoStitch, which is perhaps the easiest to use because it doesn't require setting a zillion controls and options. Just load photos into it (in any order!), and it does the rest. And it's free. Available here: AutoStitch

The warning message is in the lower right corner; I posted a screen shot of it above in this thread. I don't own a cell phone of any kind, but I do have an iPod Touch (Gen 7) which apparently can run the DJI Fly app. So I'll try what you suggest using my iPod Touch while it's connected to the...

Yes, both the MC 2 and the Integra goggles are supported with the Mini 3 Pro, and no, the goggles are not supposed to be used with the DJI RC instead of the MC 2. Some folks here have reported being able to do so, but they all say that it's wonky and not suggested. So there's no way that I...

Pardon me for being a newbie, but I don't know HOW to connect to DJI Fly with my setup (Integra, RC Motion 2, and Mini 3 Pro). I do NOT own any kind of smart phone. I *do* have the DJI RC which came with the Mini 3 Pro, but I've been told that I can't use that with the goggles, so I'm at a...

Thanks, but all three (goggles, remote, and bird) are up to date according to Assistant 2.

Just added the DJI Integra goggles and RC Motion 2 to my Mini 3 Pro kit, and they all work great together, but the goggles keep displaying this warning message: "Not connected to DJI Fly". Anybody know what this means and how to make that warning go away? Thanks in advance for your help!

I can't find it on DJI's website, so I uploaded the charger hub's manual to my personal server for you HERE.

Yes, that's what it means. See the hub's User Guide, pages 1-3, for full explanation and diagrams.

The "DJI Mini 3 Pro Two-Way Charging Hub User Guide" (which should have been in the box with your hub) includes the following info about the "Function Button". Everything below is from that User Guide. Function Button Press to check the battery power level. Press and hold the function button...

I'm convinced that folks who are complaining about their Mini 3 Pro having a lousy camera either got a lemon or are using it wrong. Here's a recent sunset as seen by my Mini 3 Pro. Pretty clear, yes?

My Mini 3 Pro made blurry videos until I replaced its SD card with a much FASTER one. It never complained that the original SD card was too slow, but in fact it was throttling down the resolution to compensate for a bandwidth bottleneck. Ever since I replaced the SD card, all videos and photos...