Recent content by Kris.

Thnx a lot for your comment. Seems less likely that factory reset would solve the issue ...

OK, thnx! Looks like "factory reset" for me then :-(

Hi, question to fellow Samsung S20 users with Android 11 update - is Litchi working OK after the 11 update? On my S20+ it closes (crashes) constantly :-( Before the update it worked OK. Might be that it conflicts with some other app I have installed - I updated to 11 in Novmber and now flew the...

I reinstalled the app - no effect. But while going through the setting after that, I stopped on the Gimbal Gesture Control ... I knew it was there but I had never used to control the gimbal this way. Switched it Off and voila! - drifting is gone! For future reference - my phone is Samsung S20+.

Hi, I have been using Litchi with my Mavic 2 pro for over a year without any issues. But just recently started to have problems - gimbal is slowly moving/drifting upwards. It's mostly fixed to -90 degrees while flying but now it's slowly drifting to -89 ...after couple of seconds -88 ... -87. No...

Hi, ever since I started using waypoints to fly to my 360 panorama location, I started to get "Panorama capture failed" notifications. The problem disappears when I switch to Tripod mode and back to P-mode for example. I'm exiting waypoints mission by pressing pause and then red Cross. And I'm...

Same here - 100% hand launches and landings with my Air and now with M2P. NB! I always land it on may palm, I don't grab it! So no stuggling from the drone. All sensors are working as they are suppose to work. The poor thing doesn't have any idea, where it landed - on the ground or on my hand...

Had to wait for quite some time for this opportunity - misty mornings are not very common where I live.

Unfortunately it's a common problem with latest app/firmware. It's only video signal/feed that is lost, not the controls. That's wht RTH does not kick in. Scary and annoying but actually no big risk, if you don't have to use visual info in order to navigate home. Nothing to do from a pilot side...

Hi, These are not actually tv-signals, of course, but they do look like ;-). 360 panorama, shot with Mavic Air, projected to Tiny Planet. br Kris.

OK, thnx. At least now I know ... I'm also using the phone to access work related things and I'm not sure how would all the stuff work with custom ROM ...

Hi, I'm using both DJI Go4 and Litchi on Galaxy S8+. It seems that Samsung has removed the option not to select default app permanently? I mean, when I connect the cable, it only gives me option to select either DJI or Litchi. No other options, i.e. temporary/don't ask any more etc. Is it so or...

DJI chargers are "dumb chargers", nothing more than providers of constant current and voltage. All the control is inside the Intelligent Battery. I really can't imagine the situation, where broken or badly functioning (aftermarket) charger could damage the battery. Two most probable scenarios...

I also was not able to use U1 cards, although in test with my PC these cards are showing write speeds well over 12.5MB/s (even more than 30MB/s). It seems that the method how DJI evaluates card speed is faulty ... or maybe DJI is using slow controller that handles writing to SD card ...

Not necessarily if you talking about firmware updating only. But you will see a message "not being able to update due to low charge" or something similar, if there is not enough charge in the battery.