Recent content by Maniac_au

Have you tried what is suggested in this thread? https://mavicpilots.com/threads/bricked-my-mavic-pro.47418/

So cant talk to the board @ all? Unusual as I’m sure I put my Platinum on 1.03.0700 before going to 1.04.0300. Maybe it was already going to fail?

Are you sure it is bricked? Wouldn’t have thought it would brick it unless you didn’t flash it correctly Core Boards are both the same it’s the ESC boards that are different, also does it have an MicroSD card installed that my have been the problem if getting errors.

Yeah, mainly after info re: if a common occurrence, as can only fly one @ a time, just upset that the remote is a dud from a shop

Also have 2 other remotes that have no issues.So pretty sure remote is a dud.

Yeah have 4 including 1 that was never crashed, so repairs are good.

Hi, all have a MP Controller that appears to be consistently disconnecting, had issues binding as far as I was concerned, Took it back to shop who returned it to their distributor, came back as No Fault Found. Managed to get it to bind, but it disconnects very quickly. Is this a common issue...

Had the same issue with one of three controllers that I had purchased over the last few months, returned it to the store after weeks of testing, it was returned to the local distributor & tested as “no fault found” in the end I set all my Mavics to the same firmware version as well as the...

Hi, all new to Mavics, but previously had a P3A just spotted this new requirement, regarding registration, spent the morning while waiting on some work being done on our car @ the dealers, reading through the Public responses. To the proposed changes, never knew it was coming as very rarely get...

My experience from buying 3 Mavic Pros & an MPP, 3 had been crashed, 1 mishandled in travelling as didn’t have a gimbal protector on. 1 Camera Gimbal fitted by store owner drone kept shutting down, removed Camera Gimbal & it stayed on, fitted new Camera Gimbal complete within the hr all...

The easy way is if you have multiple units to swap out parts for testing, that way you can determine what parts are good.

Have you checked they are turned on?Also are the Left & Right images showing the dots? As very hard to tell from picture.

When you try it do you get the red rectangle that asks you to move in or out?

Show edited now

Hi, did mine this morning as also a repaired unit, when I did mine the 2 shots in the left bottom corner show the camera view as well, yours are not. Guessing it might need the camera as well to work out the size of the display. Is it displaying as hard to see. Bill