DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Recent content by MavRAT

  1. M

    yaw when gimble tilt is activated?

    Update to the update: I had to send it in again, it came back the first time and the problem still continued. This time they stated it was both stick boards that needed to be fixed. I guess it was cheaper to just send a new remote. New remote works fine, all is good and they covered it all...
  2. M

    Slow Yaw to the right

    Hello, I have a Mavic 2 zoom and was having problems with mine and a slow yaw to the left. I was able to do a calibration and on the screen after returning the left stick from a yaw to the left it would not return to center and had about 20% still showing to the left. When the 20% was present...
  3. M

    yaw when gimble tilt is activated?

    https://drive.google.com/file/d/1SKpTLGMX_3MtMaO2IBDxLpVKlqwTEY0-/view?usp=sharing Here is a video of what it was doing that prompted me sending it in. Hopefully this will save others the frustration if they are having the same issues.
  4. M

    yaw when gimble tilt is activated?

    Here is an update. The problem resurfaced and continued to be an issue. I finally had to send it in for repair. Its on its way back now, returning Thursday. They stated the board for the left hand stick was disconnecting and needed to be fixed. Our department drone (mavic 2 enterprise) is...
  5. M

    yaw when gimble tilt is activated?

    Thanks for the reply I have been pulling my hair out trying to figure it out. I had checked the firmware but it said it was the most updated so I did not re load it at the time. I watched on youtube about a guy who had an mavic air. it was doing a roll to the side when he activated the down...
  6. M

    yaw when gimble tilt is activated?

    Ok, well it was the Zoom roller not the gimble tilt roller. I updated the firmware even though it said it was up to date. The controller then calibrated fine and when I restarted the drone to check it, it was like it was new again, going through all the on screen tutorials. I also deleted...
  7. M

    yaw when gimble tilt is activated?

    Yes I did. I believe it wont complete until you move both sticks in all directions, and do full motion on each wheel.
  8. M

    yaw when gimble tilt is activated?

    I am not sure if anyone else is having this issue. I have done a remote calibration on the remote and when the gimble tilt is activated it also causes the drone to spin. I have done the calibration many times and the graphic shows when gimble tilt is activated it also inputs a yaw more so in...
  9. M

    Crystal sky mavic 2 Enterprise dual issues

    Thank you! Thank you! Thank you. The video instantly changed our CrystalSky from a $700 paperweight, to a working unit again. Excellent!