Recent content by RC_Powerz

Sure, its not a big deal but sometimes I like to use brief screen recording shots in some work and one thing I've noticed is that the built in screen recorder on the RC PRO seems to use a variable frame and bit rate and I cant seem to find a setting to change the screen recording app to a fixed...

Try scanning that little QR code with the D SERIAL app, I bet it's for a production date and internal quality control, looks kinda like that same style. I do know the knock off wide angle I bought of ebay for like $40 has nothing fancy, doesn't even have glass covering on the tele lens, its...

Even the $30 knock off wide angle lens with no magnets triggers this, it's not magnet related but most likely weight related. Just a FYI, the cheaper knock off is horrible, the images it produces are so soft and out of focus it's useless, do not buy the cheap version from eBay or ali, it's a...

I have this exact same issue and only with the RC pro controller and mines from a fresh batch, it just arrived yesterday directly from DJI, its not drone related, it's the controller, constant disconnects, DJI is replacing my controller but this is a common issue for the RC Pro controller. You...

Here's an example, only 5 feet away from home point, from all green to instant purple; 0% signal on the logged data. Also what a "flight" look like as far as disconnects goes. Rolled the firmware back but same result, Had to box it back up, cant risk it, and I'm completely floored with the...

I too get this message at start up and I too am loosing connection so often that I just don't feel safe using the RCPro and am returning/exchanging it for a new unit, just received it yesterday from DJI too but its loosing connection not even 300 feet away in line of sight, my video does kinda...

So I was kinda performing a reversing shot with a arching descending pirouette turn at end to start heading to home point, but a shot I've done many times before on the Air2s and my Autels, perhaps just not used to resolution rate of this bird yet and went to far with the sticks, more than happy...

Unfortunately it powers on, lights up, flashes yellow and gives the beep but no connection is made to controller or app, tried to rebind too but it wouldn't make connection, even tried with the A2s remote. Id imagine something inside was damaged from that 200ft fall into the sand or getting wet...

$159 for the express replacement. That's supposed to cover 1 battery too, had to input that serial as well for the refresh care and it is toast, wont power on now or charge.

I'm hoping maybe DJI will give some kind of response as to telling me what setting it was on after data analysis, I made a note in my refresh care filing and am going to try calling Monday to have a tech make a note on my case but I did use express refresh care so the "data analysis" it says is...

yes, I was just able to retrieve that log file, here it is: Only thing I can rationally figure is it was set to "always" right from the factory if this was a normal response to my input and not a feature failing. I never even opened that menu on the M3, it was only my 7th time powering it on...

This is exactly my experience with the Air2s and this feature as well. Whatever maneuver I performed over the beach was one I had done many times with my Air2s and never triggered a motor stop, perhaps it was encroaching on the shut off limit and I never knew it because of that feature saving...

If true wouldn't that mean "emergency" mode for motor stop function on the M3 isn't functioning properly? I never have changed that default for any of my birds, it was on default of "emergency", never have I selected "always". My understanding is that "emergency" mode would need to see a few...

No, sorry, wasn't clear there, not spinning, just drone powered on, lights flashing , gimbal tight and trying to work, lost connection to controller when it hit ground, never regained it, but drone acted like it has just been powered up and set upside down when it was retrieved. Full loss of...

it's on Emergency only, never changed the default, that was more of a old school late reaction, last ditch knee jerk reaction when I saw it start falling towards the surf and my camera view spinning out with the navigational error warning flashing on screen. it gave a red nav error on the...