Recent content by sclelectronics

I don't have an iPnone.... But I use an iPad to deal with all my family that have one.... The Solution is an "OTG" adapter!!! This allows you to connect an Thumb-drive to both devices.. or and sd card reader...... It's are recognized as an external storage one either device. So you file...

Yes In have the PolarPro set.. I also use PolarPro filters on all my Nikons... They fit just fine! When twisting them on... I grip on the upper right side and lower right side. No need to force them, you may need to wiggle the filter slightly to line up the slots to paws. Good Luck

Don't need it to read PDFs... The built-in browser will open them without a problem!! I keep the latest manual in my slot 2 sd card....

Well on my Mavic 2 Pro.... 1.5mm Allen Good Luck, Stuart

FYI... You can also connect a micro usb on the side or usb c on the bottom. Connect the Crystalsky to your computer, Open the system manager( middle button) You will see a message" USB connected" Tap on this message, this will take you to a screen to turn on USB Storage. After your computer...

If you know someone with a CNC Mill... It is a snap to make a new Strap(same shape as the DJI Part) and mounting plate. Good Luck...

If you have a Mavic 2.... this photo my help...

Notes on this from a IT engineer/ consultant....... I use Win7 x64 Professional edition. 1. Download the current versions of the DJI Flight Simulator. 2. If you in the past, had any problems with your security software warning the files are infected... Suspend them while installing DJI...

Btw..... you also can charge your remote directly with the stock charger.. Here is the AC and RC battery charging together!

I have been reading a lot about people losing their drones in water.... Well I was doing a little surfing on the Internet and found this little Gem! It is called GetterBack So if you have DJI Refresh insurance and fly over water.....This give you a chance to retrieve your drone...under the right...

Here is my solution to mounting the Crystalsky... Using my small CNC mill I machined up some parts... I made my own crossbar like DJI's original mount. and a mounting plate. So the DJI's adapter just screws to the mounting plate!

Hello everyone, I am an electronic/IT Engineer For leisure I do Photography, hunting, and CNC Machining I have been into RC Hellicopter for long time, and past several years Quadcopters..... This is my first fully stabilized video platform!! Things has changed vastly improved since my first...