Recent content by ValG

Drone is new & problem is there from the start - tentative flying because of vision system error, no possibility of crashing. To get to the ribbon cables it appears that I will have to undertake some disassembly. I would be very reluctant to attempt this as it might put warranty at risk. I am...

Wind conditions eased sufficiently so that I could test flying the Mavic slowly towards a shrub in my garden. Got within a couple of inches of the shrub with no sign of the brakes kicking in. This was my last hope that I could fly without too much risk but I am now about to go to the last...

Have now tried to calibrate on a different pc with no success. At this stage warrant return seems to be my only option. Thanks for your advice

With strong winds in the last few days did not get to fly except for a short period today. Have not been brave enough to fly at any obstacle yet. However when placing something in front while hovering there are no radiating patterns of obstacle avoidance system visible on screen. A warranty...

Because of the vision system error I have only flown the Mavic on a couple of occasions. These were outdoors where I had plenty of manoeuvrability if there were a problem. Thanks for the suggestion of holding something in front of the sensors to see if the obstacle avoidance indicator changes...

Monitor is 23inch

Tried changing the resolution as suggested. Previously calibration screen displayed circles with outline corners of a square in the centre. Aiming the Mavic at the screen had no effect. The 2 sensor boxes displayed as dark grey. Having changed the resolution the circles and square outline have...

Iannes, Tried option 2 a couple of times - still no appearance of red box on screen. Guess I will have to try calibration on another pc. On the calibration screen both sensors show dark grey boxes - should they show a camera view of the screen? Thanks for your help in trying to solve this problem.

Thanks Iannes, Will try that first and let you know how it goes

Thanks Thunderdrones, Will try that & hopefully it will work

New to drones and got my new Mavic Pro Platinum in the past week. RC shows 'System Error', 'Check App'. App shows 'Vision System Error' but when I go in to 'Aircraft Status' screens everything looks fine. Tried flying in 'Beginner Mode' but did not have enough courage to bring it close to...