Aftermarket iPad holder?
- Thread starter 225
- Start date
It looks good, but I would say it would be very front heavy and with the neck strap where it is not vey practical.
I've gone this way and the neck strap and nvidia are very well balanced. You don't need to see the screen on the remote as all the info is in the DJI go 4 app.
I've gone this way and the neck strap and nvidia are very well balanced. You don't need to see the screen on the remote as all the info is in the DJI go 4 app.
This is the one I got and it works perfect. Very well made. And like Scooby mentioned, you don't need to see the controller screen info when flying.
You just need to supply the holder itself which can be purchased online as well.
DJI Mavic Pro Lower Ipad/Tablet Holder Adapter (CNC Aluminum, Anodized black) | eBay
You just need to supply the holder itself which can be purchased online as well.
DJI Mavic Pro Lower Ipad/Tablet Holder Adapter (CNC Aluminum, Anodized black) | eBay
Yeop, a lot of folks are making their own or 3D printing them. In fact I saw one that this guy made on onother forum from plywood. Talk about saving a buck or two. But why not?, if it works, go for it.
Made a more minimalistic one out of 7mm steel bar covers in heat proof plastic
My mavic hasn't arrived yet so I'm just doing a little pre planning. Not even sure what tablet I will be using yet. I have a 10" Surface RT I think will work but may be a little big and heavy. But with neck strap would be OK as long as it's balanced.
Sent from my SM-G935W8 using MavicPilots mobile app
Sent from my SM-G935W8 using MavicPilots mobile app
Stiff Velcro on rear of tablet holder, soft Velcro has a quick release std camera strap clip sewn onto each end ,easy as.
Mavmount is by far the best I have seen and used. Forget the flimsy plastic home made mounts. This is a serious solution. Interesting s all aluminum, perfectly balanced you even have a dual screen option. It is a bit pricey but it is worth every penny
MavicMo
Well-Known Member
- Joined
- Oct 12, 2016
- Messages
- 346
- Reactions
- 265
I've got the one in your picture below. Its advertised as for a device the size of an Ipad Mini. Which it does work well! No issues with signal from the antennas to the Mavic. I tried it with my Ipad Air and the Air is a bit too big as it makes the holder a bit unstable/wobbly and very "top heavy" Again, the holder is designed for nothing larger than an Ipad Mini, so I was exceeding what the seller/designer made it for...
I've got a MavMount on the way to use my Ipad Air.
I've got a MavMount on the way to use my Ipad Air.
Anyone try many of the iPad holders like made for the P4? That attaches to the cell phone mount?
Think it messes with the antennas?
Like this:
Ordered the ReadyAction Office for the ipad today. Liked its access to the display without straps getting in the way.
We had a lot of success with ours, just as an option for those out there wanting to use your ipads or similiar:
Video: Webshop: DJI Mavic Pro iPad / Tablet Holder V2
Video: Webshop: DJI Mavic Pro iPad / Tablet Holder V2
...and the most expensive on the market.
$60?? You can by 2 Skyreat or Pgy with that.
shakerben
New Member
- Joined
- Nov 27, 2016
- Messages
- 3
- Reactions
- 3
- Age
- 39
I bought the mavmount and it's totally worth it - even with the expensive shipping to the UK. It's unbelievably well built.
I also upgraded the mount with the Joby iPad grip which is not essential but a nice addition to the mavmount.
I also upgraded the mount with the Joby iPad grip which is not essential but a nice addition to the mavmount.
Reuuc
Active Member
Ping^Spike
Well-Known Member
Reuuc
Active Member
Ping^Spike
Well-Known Member
Similar threads
