Hi all.
I have a Mavic, latest firmware, latest app version running on a Samsung GALAXY S8 Plus.
Was flying off a sailboat over water doing some video footage when the disconnect occurred.
I could see a RTH was initiated. The scary part is that I was on the sail boat and I was moving so the Home would have been some point in the water!
After RTH was initiated, I kept on pressing the RTH button on the remote in order to cancel the command... After maybe 20 or 30 secs, the remote connected again, I could see the video on my phone, and managed to send the Mavic to shore where my friend was. The distance between me and the Mavic couldn't have exceeded 200meters. Again while trying to land, aircraft disconnected again and the same thing happened all over again. Regardless I safely managed to land it again on shore.
2nd flight that same day, I'm on the boat, did a flight and when I brought the Mavic back to the boat, the Mavic was no more than 2meters away straight in front of me, aircraft disconnected on the screen, it was Not responding to the remote and after a short time, initiated a RTH. Started going up to the RTH altitude. I pressed to RTH button to cancel and the Mavic seems to have reconnected after a couple of presses. I finally got her back.
Environment I was around, I was on a sail boat, there was a small yacht in from of me possibly with his radar on, very little mobile signal.
Noteworthy... I was having a hard time getting the app to accept the remorse as the RTH position rather than the take off point. I assume because there was no data coverage where I was?
I will try a suggestion I read somewhere where I would keep my phone in flight mode. But I feel like the app doesn't work that well with the GALAXY S8 location feature.
My frequency in the dji go app is on Auto.
Any help or thoughts would be appreciated.
I have a Mavic, latest firmware, latest app version running on a Samsung GALAXY S8 Plus.
Was flying off a sailboat over water doing some video footage when the disconnect occurred.
I could see a RTH was initiated. The scary part is that I was on the sail boat and I was moving so the Home would have been some point in the water!
After RTH was initiated, I kept on pressing the RTH button on the remote in order to cancel the command... After maybe 20 or 30 secs, the remote connected again, I could see the video on my phone, and managed to send the Mavic to shore where my friend was. The distance between me and the Mavic couldn't have exceeded 200meters. Again while trying to land, aircraft disconnected again and the same thing happened all over again. Regardless I safely managed to land it again on shore.
2nd flight that same day, I'm on the boat, did a flight and when I brought the Mavic back to the boat, the Mavic was no more than 2meters away straight in front of me, aircraft disconnected on the screen, it was Not responding to the remote and after a short time, initiated a RTH. Started going up to the RTH altitude. I pressed to RTH button to cancel and the Mavic seems to have reconnected after a couple of presses. I finally got her back.
Environment I was around, I was on a sail boat, there was a small yacht in from of me possibly with his radar on, very little mobile signal.
Noteworthy... I was having a hard time getting the app to accept the remorse as the RTH position rather than the take off point. I assume because there was no data coverage where I was?
I will try a suggestion I read somewhere where I would keep my phone in flight mode. But I feel like the app doesn't work that well with the GALAXY S8 location feature.
My frequency in the dji go app is on Auto.
Any help or thoughts would be appreciated.