Anyone using the LYONGTECH 6 in 1 charger for mini 5 pro?

[AnDronioBanderos]

Hi

Does anyone on here have any experience with the LYONGTECH 6 in 1 charger for mini 5 pro?

The one in the attached picture.

Looks like some useful features such as storage mode and simultaneously charging batteries and controller

Can't seem to find out the charging wattage.

Anyone using it for other drones even?

Thanks

 

[BossBob]

I have this charger. I put one mini 5 pro battery on it and it charged but threw a hissy fit as it got to cell balancing. The mini 5 batteries are a lower voltage but higher power than mini 4 batteries. They are also physically lighter. Not going to bother as the new charging hub and a decent 100w charger are faster than the hub supplied with the ‘4.

 

[AnDronioBanderos]

I have this charger. I put one mini 5 pro battery on it and it charged but threw a hissy fit as it got to cell balancing. The mini 5 batteries are a lower voltage but higher power than mini 4 batteries. They are also physically lighter. Not going to bother as the new charging hub and a decent 100w charger are faster than the hub supplied with the ‘4.

Cheers BossBob

That saved me spending money needlessly as I have a 120w/charger here and was using it for my m3pro and m5pro but read about the LYONGTECH one and was about to order.

 

[BossBob]

The only advantage I can see with it was the ability to charge a depleted battery to 60%.
My 100w charger gives me 3 outputs. Charging block (2 batteries) with one, drone (1 battery) with second and controller with third.

 

[Ken Schmidt]

I have this charger and use it to Charge my Mini 3 Pro , Mini 4 Pro and the new Mini 5 Pro Batteries. It also Charges my Controller and phone at the same time.