Blinking icon

[Boog0822]

So in the midst of my first run through three batteries on my new Mavic Pro. Just got it yesterday. [emoji2]
The first two batteries went well. I started slow with some circles and elevation changes. It handles a bit better than my old P3S, so that's good.
Anyways... During the third battery I noticed the remote control icon on my phone's screen was blinking. I still had total control and noticed no problems. I brought it back down, landed and turned it off and back on. I got ready to fly and the icon this time was completely blank, turned off. I took off and hovered a bit and zig-zagged in front of me with total control. Nothing seemed wrong but I landed and turned everything off and called it a day. What happened and what is the remote icon supposed to look like?

Thanks!

Rookie Mavic Operator JT

Sent from my SM-N920P using MavicPilots mobile app

 

[Jordan]

It just means there is a lot of signal interference in that area.

 

[sportfisher23]

Has happened to me too. Full bars and no other warnings. Manual does not seem to mention it. I let it hover a bit, make sure my home point is set, yaw around in a circle and then let it rip.

I have flown down to 3 bars and have gotten a yellow Strong Interference warning but was solid, not flashing.

vsk

 

[Boog0822]

Ok cool, thanks! I'll give it a go again tomorrow and see how it works.

Sent from my SM-N920P using MavicPilots mobile app

 

[CactusJackSlade]

It just means there is a lot of signal interference in that area.

I believe that is correct, or at least confirmed in other threads and DJI groups.

I've had it happen to me here and there, and of course in the middle of town...