Camera mount and cables

[RichK69]

Hello all,
I recently obtained an MP1 where the camera was torn off. The replacement camera I have also has its ribbon cables cut as seen in the below photo.

1) Are there only 3 cables that connect to the camera?

2) I'm guessing the cables shown here: Dji Mavic Pro Camera Ribbon Cables for sale | eBay are the correct replacement ones I need? As I don't have the complete cable it's hard to tell which ones I need, can someone help identify the 3 cables I need pls?




I can't see how the camera mounts onto the body, I assume the black component marked below is broken which would be the mount?

3) What's the name of this missing piece pls?


The mount on the body is shown below,

4) Is there anything missing from this to mount the camera?




thanks in advance for your help.

 

[Cafguy]

What's the name of this missing piece pls?

That is a piece of your broken Vibration damping board. You need a new one. Amazon.com
Along with the cables
Watch the video from this post.

Thread 'HOW TO: Replace Mavic Pro gimbal ribbon cable (detailed instructions)'

Apr 10, 2019

Here's a detailed video from iRepairMD that shows how to replace the Mavic Pro gimbal ribbon cable (from start to finish):

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Note: The DJI warranty states the Mavic warranty could be voided if any work is done by a non-authorized service provider (which includes yourself). If that's not a risk you're willing to take, then you should send your Mavic to a DJI Service Center or authorized service provider instead of attempting to do the work yourself.

• msinger
• Replies: 10
• Forum: Mavic Pro

4) Is there anything missing from this to mount the camera?

That is the damping board it is kaput get a new one.
May I suggest Makers Mark for those times you need to put the whole thing Down and take a Break.

The ribbon cable is VERY VERY fragile you will easily destroy your new one.. Take your time !!!!
I don't really see much hope for that gimbal and camera working by looking at the damping board in two pieces BUT its worth a try maybe Might be best to get a whole new assembly. (gimbal and cam)

Gimbal and Camera Assembly For DJI Mavic Pro/Platinum - NEW | eBay

For DJI Mavic pro drone.

www.ebay.com

 

[Felix le Chat]

That is a piece of your broken Vibration damping board. You need a new one. Amazon.com
Along with the cables
Watch the video from this post.

Thread 'HOW TO: Replace Mavic Pro gimbal ribbon cable (detailed instructions)'

Apr 10, 2019

Here's a detailed video from iRepairMD that shows how to replace the Mavic Pro gimbal ribbon cable (from start to finish):

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Note: The DJI warranty states the Mavic warranty could be voided if any work is done by a non-authorized service provider (which includes yourself). If that's not a risk you're willing to take, then you should send your Mavic to a DJI Service Center or authorized service provider instead of attempting to do the work yourself.

• msinger
• Replies: 10
• Forum: Mavic Pro

That is the damping board it is kaput get a new one.
May I suggest Makers Mark for those times you need to put the whole thing Down and take a Break.

The ribbon cable is VERY VERY fragile you will easily destroy your new one.. Take your time !!!!
I don't really see much hope for that gimbal and camera working by looking at the damping board in two pieces BUT its worth a try maybe Might be best to get a whole new assembly. (gimbal and cam)

Gimbal and Camera Assembly For DJI Mavic Pro/Platinum - NEW | eBay

For DJI Mavic pro drone.

www.ebay.com

... Now I'd go for Bulleit or Wild Turkey 101 for one of those 'Hamlet' moments... Happy new year Cafguy.