Controller HELP! changing to usc C typr

[heavenzboi]

Hi all,

Newb here and just got my Mavic now! and im using Samsung Galaxy s8 plus and trying to change to usb C on the controller. How can i remove this little square plastic thing ??
pretty sure i have to change to right square for me to use usb C.
Please help. Thanks in advance!

 

[SeaComms]

Push it out. It just clicks into position.

 

[Chun]

Actually the rectangular plastic piece does not have to be removed. All the cables will fit in it. But I removed it to relieve pressure from the plug.

 

[heavenzboi]

i got it!! it was simply just pushing it out lol
thanks

 

[jarettp]

Actually the rectangular plastic piece does not have to be removed. All the cables will fit in it. But I removed it to relieve pressure from the plug.

This is not accurate. There are at least two different sized rectangle holders.

 

[Chun]

This is not accurate. There are at least two different sized rectangle holders.

Ok the one out of the box will accommodate type c

 

[enohp15]

There is definitely two different sizes. I had to change mine also, when it came out of the box, to fit the USB type C lead.

 

[motopa]

did you notice, type C lead DOESN´T FIT in hole in remote body? mine doesnt´it. Microusb fits perfectly.

 

[Haloweenhamster]

did you notice, type C lead DOESN´T FIT in hole in remote body? mine doesnt´it. Microusb fits perfectly.

Mine does just need to slide it left

 

[motopa]

I tried, centering.... it´s hard to put inside, and not flat in the remote (if I put the remote vertical, the usb head lead is touching, not the body). I tried with other C lead (original of my S8) and same issue... it only enter 1mm or similar... micro usb can be inserted at full)

Regards

 

[motopa]

Here a sample... microusb connector can be inserted at full (when you close the "arm leg" on remote, any problem), but type C can´t be inserted, and it´s out of arm...