DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

DJI RC Pro in FCC mode with C1 certified Air 2s

sema2022

New Member
Joined
Aug 9, 2018
Messages
4
Reactions
1
Age
64
I live in Norway (CE) and my RC Pro controller is FCC enabled with Drone-Hacks to get more stable transmissions (not more range). I have both stock N1 and RC Pro controllers.

It would like to C1 certify my Air 2s drone with the stock controller and swap to RC Pro/FCC in noisy or obstructed areas.

Does anybody know if it is possible to use the RC Pro controller with the newest FCC hacking capable firmware (v03.02.0200) connected to an Air 2s with the new firmware required to be C1 certified?

I suspect that RC pro must be upgraded to v03.02.0700 to be able to connect to the C1 cert. Air 2s. If I upgrade Air 2s to test, I may not be able to downgrade if the FCC mode is broken. For me are currently FCC more important than C1.
 
Bump - is there anybody with similar setting in a EU/CE country planning to upgrade to C1 firmware without losing FCC mode?

I have contacted DH, but they could not confirm it will work/have not tested it.
 
Check out DJIRCFFC patch rather than Drone hacks for the controller only. It's permanent and you are able to switch it on/off via parameter. Advantage is it is in the controller and not the drone's FW. The latest .0700 version should be supported.
 
  • Like
Reactions: Kawamaki
Check out DJIRCFFC patch rather than Drone hacks for the controller only. It's permanent and you are able to switch it on/off via parameter. Advantage is it is in the controller and not the drone's FW. The latest .0700 version should be supported.
what do you mean by RCF DJ patch?
can you tell me more about the installation?
 
On Telegram find channel "djiupd" (current status of the mod) and write to "fccmod_info". The guy will send you a link to the mod patcher and will add the serial number of your DJI RC Pro to the server. Afterwards you run the patcher, it connects to the server and patches your DJI RC Pro with FCC enabled. The FW which is supported is .0700 max, not higher. There is an option to later turn off/on the FCC mode.
 
Just wan tto say THANK YOU as i downloaded the MAVERIC AIR 2 FCC after the upgrade of smartphone and i lost it. I was in panic as my son wants to fly and i hopefully found it again.
We going to be holidays in Epirus Ioannina Greece and there are a so much optic view IMAGINE...

I download it before 1 1/2 years ago when was 'free' and i donated (then).
Anyway THANK YOU so much one more time to give us also the pleasure to move Km further.
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
133,781
Messages
1,587,411
Members
162,455
Latest member
Rudyr