- Joined
- Dec 4, 2016
- Messages
- 5
- Reactions
- 0
Looking for a bit of advise, I have recently bought a Mavic 2 zoom and DJI Smart Controller, when I turn then on they take ages to connect, I had phantom 4 before, that connected almost straight away. Thanks
Thanks for the reply, not sure what QMA connectors are, when I power up, the lights on the Mavic flash yellow, the light on the controller starts red then goes green then back to red. What I have found is if I turn the controller off then back on. it connects straight away.I have the Mavic 2 Pro & smart controller ( the SC was bought later on ) & find they conenct very fast, I recently upgraded the controllers to QMA connectors & find now and again I get the connection light turn blue on power up & there can be a long delay in conencting, then all will be fine for power ups/downs etc - what is happening when you power yours up, is the conenction light red then green ?
Thanks will have a look.the QMA connectors are hardware antenna connectors for removable external antennas etc, normally once my SC goes from red to green thats it until I turn it off, I must add I only use Litchi & dont ever use DJI Go 4 for all my flights now.