Dual Hard Cases for Mini 5 Pro and Mini 4 Pro

[Ken Schmidt]

Does anybody know if someone make a dual case to hold a Mini 5 Pro and a Mini 4 Pro and would also hold a RC Pro 2?

I have been looking and Cant find anything? Even settle for a Mini 5 Pro Case to hold a RC Pro 2 Controller at this point.

Might have to settle for one of those camera cases that have moveable compartments.
Let me know if anyone comes across one of these.

 

[mavic3usa]

Have you thought about making your own. There are a few generic cases (like from HF or Pelican) out there with basic foam you can cut and customize even paint. Might be a fun project.

(not me, not my video)

PELICAN CASES | pick & pluck foam PRO TIP | PLASTI-DIP

 

[Ken Schmidt]

Have you thought about making your own. There are a few generic cases (like from HF or Pelican) out there with basic foam you can cut and customize even paint. Might be a fun project.

(not me, not my video)

PELICAN CASES | pick & pluck foam PRO TIP | PLASTI-DIP

Actually I have thought about that. But I think I would take a Dremel to a preformed case and open up a compartment for the RC Pro 2 before I would start plucking? Thanks for the reply though! I would still need 2 cases for the Mini 4 and Mini 5.

 

[mavic3usa]

Actually I have thought about that. But I think I would take a Dremel to a preformed case and open up a compartment for the RC Pro 2 before I would start plucking? Thanks for the reply though! I would still need 2 cases for the Mini 4 and Mini 5.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[a2tomm]

I gave up on hard cases years ago ,I use a backpack holing the air3s ,mini 5 and the neo ,with 2 hours of batteries for each

 

[Ken Schmidt]

I gave up on hard cases years ago ,I use a backpack holing the air3s ,mini 5 and the neo ,with 2 hours of batteries for each

Thanks! I have tons of backpacks. Looking for something substantial to protect my drone family.

 

[clgreen]

Actually I have thought about that. But I think I would take a Dremel to a preformed case and open up a compartment for the RC Pro 2 before I would start plucking? Thanks for the reply though! I would still need 2 cases for the Mini 4 and Mini 5.

Lykus Makes a nice case for the 5 and Pro 2

 

[twisted flight]

i had purchased the apache 3800 from harbor freight last week on sale for $29.99. However it was just too big but it should hold 2 sets easily. I did take it back and got the 2800 instead. Sale was off but was glad I got the smaller case as its way easier to haul around with me all the time in case I want to get it out for something random I see or come across. The whole foam deal though! Talk about anxiety to taking out those foam pieces perfectly lol. i cannot take credit for this setup as i looked at enough examples to finally just start cutting out foam.