error 10087

[3Ddriller]

what is "error 30087 pitch too large" I replaced all 4 motors after a crash, reassembled and calibrated compass. Took off and mini 2 was unresponsive, flew backwards until it found a shrub, I restarted aircraft and remote and tried it again, same thing, flew backwards to a picket fence.

 

[SkyeHigh]

Have you checked the propellers are on the correct motors? What you are experiencing is a classic prop order error. See the following:

How To Replace The Propellers On The DJI Mavic Mini Drone

Here’s a simple step by step guide on how to replace the propellers on the DJI Mavic Mini. To ensure flight safety you will need to switch the propellers if they are damaged, cracked, distorted or if the screws become loose. Tip: Use the original screwdriver and screws in the box to replace the...

www.heliguy.com

 

[3Ddriller]

Yes, Firmware update, IMU recalibrated, Verified props are on correctly and tried again. Started props with joysticks, throttled up and only the front end lifted off and threw that code again. 30087 pitch too large