excessive gimbal vibration

[eddillenbeck]

Hi Droners! I only have 10 min. on my Mavic and have severe oscillations causing a error message- something like "excessive gimbal vibration". I changed the props and checked to see if motor mount screws were loose but they were tight. I don't want to run it like this and thought I'd check this forum before contacting DJI.
Is this something I can smooth out with the DJI go app?
Thanks!

 

[duelingglove]

It may be the actual cable itself. There's a video on YouTube that shows how to manipulate the cable and clear it. But, before you do that place on a flat surface and calibrate the gimbal


Sent from [emoji211]

 

[eddillenbeck]

I think I may need to turn off the Prop Guard toggle in DJIgo app but can't figure out how. Thanks

 

[duelingglove]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Sent from [emoji211]

 

[duelingglove]

I think I may need to turn off the Prop Guard toggle in DJIgo app but can't figure out how. Thanks

Search the forums here and of course, YouTube. Tons of info on both


Sent from [emoji211]

 

[ccrider]

Way cool! Had that problem and fixed it thanks to you!,

 

[Al.Sen]

Had a run away last night trying to photograph July 4th fireworks. Crash! No significant damage except excess gimbal vibration message. Thanks to posted sketch and youtube video for solution. Problem Solved and back in sky! Big thank you!!!