Gimbal Issue, it it going nuts!

[jocampo0229]

I was flying my Mavic around today. Battery was low so I brought it back to swap out the battery.

After I replaced the battery, I booted the drone back up. The gimbal would start to initialize and then go crazy!

I have attached a link the video. Does this need to go back to DJI?

IMG_7713.MOV

 

[Drone Master]

I was flying my Mavic around today. Battery was low so I brought it back to swap out the battery.

After I replaced the battery, I booted the drone back up. The gimbal would start to initialize and then go crazy!

I have attached a link the video. Does this need to go back to DJI?

IMG_7713.MOV

Wow! That is the serious Mavic gimbal disco shake!
I almost want to go to bed with that one.
Seriously though, I would try to calibrate the gimbal first.
Try another battery as well to rule that out if you have one.
What FW are you on?

 

[jocampo0229]

I am on the latest firmware.

I have tried to reset and calibrate the compass, and IMU.

currently charging the other 2 batteries to see if they make a diffrence. It's crazy because it was working perfect fine. Drone has never been crashed and only has about 6 hours of flight time on it.

 

[Tonka]

****. And I thought I had gimbal overload issues. Jesus that thing is shaking more than Shakira's hips.

 

[Former Member]

Let us know after you have recharged the battery and used the same battery you had in it before. If it stops, then try the other batteries again. Could be a firmware issue.