Gimbal motor overload problem

[pinzmann]

So my Air 2s is getting the overload message lately as in 100% of the time. I have worked the gimbal in all the motions, very smooth no gritty feeling, no blockage. When flying it the gimbal seems to operate fine, maybe a bit jittery hard to tell as I haven’t flew it for quite a while. Tried to do a calibration but never got past 10%. No care refresh. Probably doesn’t matter as DJI doesn’t have any repair parts anyway. Am I SOL?

 

[Cafguy]

NO your not SOL. Have you tried to re-calibrate the IMU and then the gimbal? Is the video you take jittery or strange?

 

[TonyPHX]

They can still repair it though. They will charge for whatever is wrong and ship you back a refurb. Worth doing asap.

 

[pinzmann]

NO your not SOL. Have you tried to re-calibrate the IMU and then the gimbal? Is the video you take jittery or strange?

No, I didn’t do the IMU. Will try that tomorrow. Thanks. The video is only slightly jittery when I’m yawing.

 

[Rishu]

Can you identify which motir is faulty in gimbal .
You can replace half gimbal (aftermarket)