Good afternoon!
I bought my Mavic Pro on Amazon from a seller with high ratings. I live in Ukraine so I had to wait a month until he came to me. When I finally got it I studied all available instructions, materials and began to prepare for the first flight.
I installed new firmware.
Version: 4.1.3
AircraftVersion: 01/03/09
RemContrVersion: 01/03/09
Aircraft Datebase: 01.00.01.04
App Datebase: 01.00.01.04
Carried out all the calibrations.
I had difficulties ONLY with the calibration of the controller. I did the calibration 20 or more times. I've always seen the message: "the last remote controller has been out of time." The blue circle did not move and I could not get through the calibration to the end. But I could! But. After a successful calibration, I still see that the lower values are not equal to "0".
I have a bottom with the left - 2 and with the right bottom - 10. I thought that this is not a problem for the first flight.
Is this a problem? So can it be?
I finished all the settings and was ready to fly.
Has included the controller, DJI GO 4 and Mavic.
All OK. DJI GO 4 did not show any errors during the check.
When I pressed two stickers down to start the motors nothing happened!
The controller does not respond to the CSC! Absolutely!
I had to lift it in the air with the help of "automatic take-off" by tapping on the screen.
When he got up he did not respond correctly to the stick. I'm using MODE 2.
I press the left forward - it flies down. I press the left back - flies down. He does not fly at all! The right stick allows only to fly forward. Back - no! I had to put him on the ground with the help of the "return home" function.
In Flight Simulator, the same thing happens.
Gimbal Dial on the controller works and moves the camera.
Control Mode Switch - set to RC.
I made a video with an error:
Mavic.mp4
What else can I do?
On the forum I found a similar problem but there is no solution:
Impossible to calibrate sticks
I do not know what to do. I've been waiting for him so long and I'm infinitely disappointed!
Help me please!
I bought my Mavic Pro on Amazon from a seller with high ratings. I live in Ukraine so I had to wait a month until he came to me. When I finally got it I studied all available instructions, materials and began to prepare for the first flight.
I installed new firmware.
Version: 4.1.3
AircraftVersion: 01/03/09
RemContrVersion: 01/03/09
Aircraft Datebase: 01.00.01.04
App Datebase: 01.00.01.04
Carried out all the calibrations.
I had difficulties ONLY with the calibration of the controller. I did the calibration 20 or more times. I've always seen the message: "the last remote controller has been out of time." The blue circle did not move and I could not get through the calibration to the end. But I could! But. After a successful calibration, I still see that the lower values are not equal to "0".
I have a bottom with the left - 2 and with the right bottom - 10. I thought that this is not a problem for the first flight.
Is this a problem? So can it be?
I finished all the settings and was ready to fly.
Has included the controller, DJI GO 4 and Mavic.
All OK. DJI GO 4 did not show any errors during the check.
When I pressed two stickers down to start the motors nothing happened!
The controller does not respond to the CSC! Absolutely!
I had to lift it in the air with the help of "automatic take-off" by tapping on the screen.
When he got up he did not respond correctly to the stick. I'm using MODE 2.
I press the left forward - it flies down. I press the left back - flies down. He does not fly at all! The right stick allows only to fly forward. Back - no! I had to put him on the ground with the help of the "return home" function.
In Flight Simulator, the same thing happens.
Gimbal Dial on the controller works and moves the camera.
Control Mode Switch - set to RC.
I made a video with an error:
Mavic.mp4
What else can I do?
On the forum I found a similar problem but there is no solution:
Impossible to calibrate sticks
I do not know what to do. I've been waiting for him so long and I'm infinitely disappointed!
Help me please!
Last edited:
