How does DJI answer, and are they right? (Mavic Air)

[TIVAJAVA]

Which of the following statements about linking to DJI GO 4 is incorrect?


A. When the remote controller makes sounds, it is ready to link.
B. When the aircraft starts linking, the Aircraft Status Indicator on the aircraft is blinking red quickly.
C. When the remote controller stops making warning sounds, the Status LED is solid green, and the Aircraft Status Indicator is solid green, the linking is successful.

 

[Simmo]

Which Aircraft? Inspire?
Go here: Link Mavic Pro Remote Controller with Aircraft | Heliguy
Scroll down on the left to 'Popular pages', and there are instructions for all models. (including the Inspire...)

 

[Bigbird48]

whats the point of your question.

 

[TIVAJAVA]

According to DJI only "C" is incorrect..

I say both B & C are incorrect

 

[Bigbird48]

According to DJI only "C" is incorrect..

I say both B & C are incorrect

When my AC has successfully linked the green light is blinking

 

[747P4]

Which of the following statements about linking to DJI GO 4 is incorrect?


A. When the remote controller makes sounds, it is ready to link.
B. When the aircraft starts linking, the Aircraft Status Indicator on the aircraft is blinking red quickly.
C. When the remote controller stops making warning sounds, the Status LED is solid green, and the Aircraft Status Indicator is solid green, the linking is successful.

Not sure if your question needs re-wording

Linking the Remote Controller – DJI Mavic Air
1.Connect your device to the DJI Mavic Air Controller and launch DJI Go 4 and click start flight, then enter camera view.
2.Go to settings.
3.Remote controller then link Remote Controller.
4.Click OK.
5.Hold the button on the back of the Mavic Air for about 3 seconds, don't release until the beep is heard.

Above is a brief summary of "linking".

 

[TIVAJAVA]

Not sure if your question needs re-wording

Linking the Remote Controller – DJI Mavic Air
1.Connect your device to the DJI Mavic Air Controller and launch DJI Go 4 and click start flight, then enter camera view.
2.Go to settings.
3.Remote controller then link Remote Controller.
4.Click OK.
5.Hold the button on the back of the Mavic Air for about 3 seconds, don't release until the beep is heard.

Above is a brief summary of "linking".

Was copy and pasted from DJI QUIZ

 

[747P4]

Was copy and pasted from DJI QUIZ

OK, makes sense now!