I want to solder wires directly to mavic minii

[flynsign]

Don't forget your operator Id, i suspect you've nudged it over 250 grams.

Yes, I realized that after the fact - which is why I've implemented a 'payload ejector' if I see any authorities coming my way.

 

[atsphenomenon]

Yes, I realized that after the fact - which is why I've implemented a 'payload ejector' if I see any authorities coming my way.

You better hope that doesn't happen between the 30 min and 14 hour mark. The ac would drop dead with the ejector, if that's the case

 

[flynsign]

You better hope that doesn't happen between the 30 min and 14 hour mark. The ac would drop dead with the ejector, if that's the case

Thought of that as well - good thing I have a few of these lipos laying around...

 

[Lifeisfun]

Here's what I did, hope it helps give you some ideas!

btw, I was able to get 14 hours flight time but the motors were a bit warm to the touch after landing, so be careful.


View attachment 89892

This should solve the wind issue

 

[Deleted member 109934]

I want to solder wires directly to my mavic mini to add two external batterys were do i solder them onto so i dont mess this up thanks in advance any help apreachiated

Forget about external battery, solder right to the power outlet and long extension cord plenty of early posts with Pics and how to, also info on batt chips and firmware issues etc..

 

[Ajkari]

Here's what I did, hope it helps give you some ideas!

btw, I was able to get 14 hours flight time but the motors were a bit warm to the touch after landing, so be careful.


View attachment 89892

This is an extreme joke right? as if pigs could fly.