Is This Normal For Osmo Pocket Gimbal?

[johndoedoes]

When I physically turn the gimbal all the way to one side it almost touches the device. See the first image with the tiny gap.

When I physically turn it the other way it stops further away and doesn’t get close to touching itself. See the second image with the larger gap

Does everyone else’s Osmo Pocket do this? Any feedback would be appreciated!

 

[gjmphoto]

Mine is like this as well. I'm saying it's designed that way!

 

[buddb55]

Yep, mine is like that also.

 

[dv8ed]

Yes same here both ways

 

[ciscokid]

Mine is the same as well. Just checked it.

 

[j.r.r.]

Pretty much the same. When turned left it touches the gimbal holding arm. When turn right the gap is about 1/8" wide and camera side is parallel to the gimbal back wall.

 

[johndoedoes]

Thanks for all the replies everyone!

Yes same here both ways

Thanks! Do you mean it stops the same distance on both sides?

Or one side goes closer than the other (just like mine).

Pretty much the same. When turned left it touches the gimbal holding arm. When turn right the gap is about 1/8" wide and camera side is parallel to the gimbal back wall.

Mine doesn’t touch, one side does get a lot closer to touching than the other...I would double check yours again if it touches or not.

 

[gjmphoto]

Actually, mine touches in one direction also