Linking With Litchi

[Gecko10]

Is there a way, using Litchi, to Link the Remote Remote Controller to the drone.

Like this with the GO4 app::

Linking the Remote Controller – DJI Mavic Air

1. Connect your device to the DJI Mavic AirController and launch DJI Go 4 and click start flight, then enter camera view.
2. Go to settings.
3. Remote controller then link Remote Controller.
4. Click OK.
5. Hold the button on the back of the Mavic Air for about 3 seconds, don't release until the beep is heard.

Thanks

 

[dawgpilot]

You can link the controller without using apps at all:

1) Turn on both your drone and controller.
2) Hold the button on the back of the Mavic Air for 3 seconds until you hear the beep
3) At the same time, press and hold Pause, Fn, and the right customizable button on the controller until you hear the controller start beeping.
4) Hold the controller near the drone until it connects and stops beeping.

 

[Gecko10]

thank you sir

 

[Deleted member 103366]

Can this be done in the Litchi App? If so how?
So far I have can't find it and had to use the button combination.

 

[Meta4]

Can this be done in the Litchi App? If so how?
So far I have can't find it and had to use the button combination.

No .. you can't do that in Litchi ... and there's no need to.
The link is between the drone and your controller, it has nothing to do with the apps you might use..
If your drone is linked to the controller already (surely it is?), there's no need to re-link it for using a different app.

 

[Deleted member 103366]

No .. you can't do that in Litchi ... and there's no need to.
The link is between the drone and your controller, it has nothing to do with the apps you might use..
If your drone is linked to the controller already (surely it is?), there's no need to re-link it for using a different app.

I swap controllers at times. I was just puzzled that I couldn't see a way in Litchi. Thanks.