rjanumpally
Well-Known Member
- Joined
- Nov 20, 2017
- Messages
- 398
- Reactions
- 91
- Age
- 40
is the gimbal vibration problem still there after the 4.100 update of firmware. this was not asked anywhere.
did anyone try gimbal calibration with the low noise props on. i heard that helps prevent the error described above and effects. it's a pain in the *** but i think will prevent that only thing u will need to do it again when putting on the regular props.
did anyone try gimbal calibration with the low noise props on. i heard that helps prevent the error described above and effects. it's a pain in the *** but i think will prevent that only thing u will need to do it again when putting on the regular props.
Hi,
I cashed in my DJI points and ordered the low noise props. On the first test flight, I saw the gimbal vibrating immediately after taking off. The Go app then reported Abnormal Gimbal Vibration. I switched back to the original props and the problem went away. Put the LN props again. The problem came back.
I came in the house to type up this thread to ask for help. In the meantime, Go app said I need to update firmware (01.04.0000), so I did that. Before I can finished typing up my question (my wife was bugging me about some chores), the firmware updated completed. So I thought maybe I should give it another try. Sure enough the problem went away. I thought I might share this info anyway in case some one else has the problem.
P.S. I am pretty sure I installed the props correctly in the first 2 tests. But there may still be a chance that the firmware upgrade had nothing to do with the solution and that I may have done something else differently on the 3rd test.
I have the Mavic platinum and have had no problems at all. Even tried a second set after seeing this post. still no problems. Are you using true Dji props or after market?