Mavic 3E not following route with camera in center on the route

[Sandy1972]

Hello guys,

I have been flying the M3E in waypoint programmed for a 10km route and have kept the camera gimbal to follow route setting.

But i have seen the drone to be flying in a slight left crab angle to the route and not in center with the camera cursor.

This is affeccting my video centerline and i cannot physically yaw the drone to align with my route.

The same was happening with the M2 PRO but there i could yaw the drone to my programmed route.

ANy ideas how to solve this

 

[Meta4]

ANy ideas how to solve this

Perhaps the camera is not aligned exactly to point straight ahead and needs adjusting?

 

[WanderLost]

Hello guys,

I have been flying the M3E in waypoint programmed for a 10km route and have kept the camera gimbal to follow route setting.

But i have seen the drone to be flying in a slight left crab angle to the route and not in center with the camera cursor.

This is affeccting my video centerline and i cannot physically yaw the drone to align with my route.

The same was happening with the M2 PRO but there i could yaw the drone to my programmed route.

ANy ideas how to solve this

The times I've seen this with my Matrice M30 is when I've turned the camera slightly to avoid getting the props in view and then forgot. The drone crabbed sideways a bit until I figured it out. As Meta4 mentioned, that might be the issue. You could try re-calibrating the gimbal and camera just to see if that improves anything.