Mavic disconnected at startup

[Gman60]

new to the mavic community been flying since the mavic pro first came out recently I have had an issue after I get everything turned on the controller in the Drone seem to be hooked up it says ready to fly but it says disconnected on my phone screen and there's no camera view showing not sure what the issue is I've tried it on two different phones one is a brand new s22 Ultra Samsung Android and the other is my old Note 10 everything originally worked on the Note 10 haven't flown in a couple of months and having the same issue with both phones any help would be appreciated last thing I have done is tried a tablet which is an Android and still having the same issue

 

[AnzacJack]

your cable doesnt look to be in fantastic shape (could just be the pic)
I would start there

 

[Gman60]

I've tried a couple different cables still having the issue but I did hook the wife's brand new iPhone 13 up and everything worked just fine connected okay

 

[lensimages]

I've tried a couple different cables still having the issue but I did hook the wife's brand new iPhone 13 up and everything worked just fine connected okay

Probably an android update causing this problem, cheers Len

 

[MavicAir2Marc]

I GOT DJI FLY APP VERSION (1.6.12.)(ANDROID)FROM "DJI SUPPORT" LAST NIGHT ON TWITTER!

Hey Guys I started having problems with the DJI FLY APP VERSION (1.6.9.) yesterday after my GALAXY NOTE 20 ULTRA 5G had received a new security system update and what it started doing right after the update was if you tried to open the app it would immediately close the app and wouldn't stay...

mavicpilots.com

Maybe it has something to do with an android security update.

 

[Paul79UF]

Hi, I was dealing with this problem today while getting my Mavic Pro Platinum ready for sale.

The DJI Go 4 app on my Samsung Galaxy S10e would only say "disconnected" and not show a live camera view.

My old Samsung Galaxy S2 10" tablet would connect just fine.

The easy solution was to enable "USB debugging" on my Galaxy S10e phone.

Here are the instructions for the S10e. It might be different for your S22.

1. • From a Home screen, swipe up or down from the center of the display to access the apps screen.
     These instructions only apply to Standard mode and the default Home screen layout.
   • Navigate:
     Settings
     
     
     Developer options
     .
     If unavailable, swipe up from the center of the display then navigate:
     Settings
     About phone
     Software information
     then tap
     Build number
     7 times.
     If presented, enter the current PIN, password or pattern.
   • Ensure the
     Developer options switch
     (upper-right) is turned on
     
     .
   • From the Debugging section, tap
     USB debugging
     to turn on or off.
   • If prompted, tap
     OK
     to confirm.