Mavic Enterprise and App for Photogrammetry

[tjohnson1800]

I have returned from a week-long drone search-and-rescue school in Texas. While out there, my instructor showed me how he used DroneDeploy with his Phantom 4 to do grid searches. Now that I am home, I thought I would try this with the Mavic Enterprise today. However, when running through the flight checklist, I continued to receive a message that stated "Invalid Remote Controller Mode." I checked the DJI Pilot app and all settings were correct and there was no error message. The mode switch on the controller was set to GPS mode, which is the recommended mode. I then checked on the DroneDeploy web site for supported drones and finds the Mavic Enterprise is not supported. Therefore, I assume this is related to this problem.

I have some questions related to this. First, if you have a Mavic Enterprise and have used DroneDeploy and have encountered this issue, how did you address it. Second, if you do not use DroneDeploy for photogrammetry, what app do you use?

Thanks in advance for all responses.

 

[BD0G]

Your Mavic 2 Enterprise is not supported by Drone Deploy.
Supported Drones

Strangely the Mavic 2 Enterprise Zoom is.

 

[tjohnson1800]

Your Mavic 2 Enterprise is not supported by Drone Deploy.
Supported Drones

Strangely the Mavic 2 Enterprise Zoom is.

Unfortunately, you are correct. I agree that it is strange that they support the Zoom but not the Enterprise. Are you aware of any photogrammetry app that will work with the Enterprise?

 

[BD0G]

No. Currently it appears that just the DJI Pilot app is compatible. With Lichti having some features supported and able to be used with the Mavic 2 Enterprise. See thread here :Litchi for M2E?