T tunaman222 New Member Joined Jun 12, 2020 Messages 1 Reactions 0 Age 26 Location new york Jun 12, 2020 #1 just replaced propellers followed all the proper directions but it still wont lift off ground... it was flying great until this bs. propellers moving fine but the drone is not coming off the ground please HELP!!!!
just replaced propellers followed all the proper directions but it still wont lift off ground... it was flying great until this bs. propellers moving fine but the drone is not coming off the ground please HELP!!!!
Alex Baxter Well-Known Member Joined Oct 12, 2016 Messages 445 Reactions 314 Age 71 Jun 12, 2020 #2 Can they be put on the wrong way round, so to speak, i.e. giving downward thrust? Do the motors accelerate when you throttle up?
Can they be put on the wrong way round, so to speak, i.e. giving downward thrust? Do the motors accelerate when you throttle up?
lannes Well-Known Member Joined Jul 27, 2017 Messages 3,321 Reactions 2,300 Location Western Australia Jun 12, 2020 #3 You'll notice on tips of the propellers there are silver bands. Looking down from the top with the drone facing away from you Left front props - single band Right front props - double band Left rear props - double band Right rear props - single band so basically, diagonally opposite each other needs to be matching bands Reactions: 8rh, ff22, EyesWideShut and 1 other person
You'll notice on tips of the propellers there are silver bands. Looking down from the top with the drone facing away from you Left front props - single band Right front props - double band Left rear props - double band Right rear props - single band so basically, diagonally opposite each other needs to be matching bands
EyesWideShut Well-Known Member Joined Jan 24, 2020 Messages 833 Reactions 1,717 Age 74 Location Kamloops BC Canada Jun 12, 2020 #4 To confirm what what @lannes says, there's also markings (or no markings) on the props and on the motors. Here's a page from the manual and a link to it. USER MANUAL PDF Reactions: Bxr532001, ff22 and lannes
To confirm what what @lannes says, there's also markings (or no markings) on the props and on the motors. Here's a page from the manual and a link to it. USER MANUAL PDF