Mavic Mini shoots up after auto take-off

[RUMOR]

Hey all!

I bought my Mavic mini about 2 months ago and everything was fine untill yesterday. When I took off (from my hand) the drone went full throttle up. Luckily I was able to hold on and turn off the drone. After recalibrating my compass, I tried to take off in several other spots, but the problem kept on persisting. I have now tried to recalibrate the compass and IMU several times in different locations to make sure that there was nothing interfering with the compass, but this keeps happening. Does anyone know what the problem could be? I recently updated my flyapp (maybe it's connected to this)?

Any help would be appreciated!
Thanks

 

[Deleted member 103366]

Just for clarity, are you talking about starting the motors and taking off using the button on the screen of the phone?

 

[Ice_2k]

I don’t get it. You say you managed to hold on. So how do you know it was gonna keep going up if you didn’t let it go yet?

 

[RUMOR]

I am talking about the little button on the screen. When I press that and hold it for the second or so the motors begin to spin at full throttle (I can feel extreme drag). When I start the drone with the sticks (it stays on the ground) but if i give some input it shoots up (only tried it once and luckily got it down somehow).

 

[Ice_2k]

that's normal, it's trying to take off...

 

[RUMOR]

Thanks fornteh replies It actually shot up (usually it goes up and hovers at 1.5 meters or so) to about 15/20 meters in 2 seconds and then I managed to get it down somehow. It's not the normal procedure

 

[boblui]

Pls post the .DAT and .TXT flight log files in the phone / tab by following this thread : Mavic Flight Log Retrieval and Analysis Guide

 

[Mrmund]

Check to see if you're VPS sensors are clean and unobstructed

 

[DrizzyDrones]

Good chance the bottom sensor has something obstructing it try cleaning it.. it sounds like its sensing object and rising up.. post dat and well know for sure