Mavic pro and Litchi waypoint issue

[Marko5584]

Here's a recent problem with my MP and Litchi. Whenever I start a waypoint mission in Litchi, the gimbal is unresponsive and I have no pitch control for the camera. The dial on the RC is unresponsive, the video is fixed on the horizon and shaky. I thought this was an issue with the cold, and low temperatures, but I have the same issue in higher temperature (above freezing). This happens immediately after uploading a waypoint mission. Before I do that the camera and gimbal are responsive.

Firmware is upgraded and Litchi is upgrade. Gimbal is calibrated.

Any ideas?

I ran the same waypoint mission with a P3 standard and no problems.

mark

 

[Karl D]

What do you have the camera set to do in the mission?

 

[Marko5584]

Camera pitch mode is disabled so I can control up and down. Rotation direction is set to manual. No POIs.

I think it's a mechanical issue with the camera.

Thanks.

Mark