I know it is something small most likely and I am most likely looking at the problem but not seeing it.
After days of researching, reading all forums, this one, Rc Groups and some others I still do not have an answer. I have checked the hardware inside, everything is connected, no broken wires on the GPS or compass. Drone has done 25 flights in total.
I have been flying and working with DJI products since the Phantom 1.
I recently bought a Mavic Pro. I know what causes magnetic interference, I do not do compass calibrations all the time, IMU and gimbal is calibrated, all firmware is up to date. I have taken off from different locations and the list goes on. Open spaces, built up area. I have many different DJI Drones, running N3 flight systems, naza fc. I think I have a good knowledge of the DJI Drones , software and hardware. (currently busy with a tethered drone running N3 with LB and a Zenmuse Z3, it will stay up in the air the whole day, busy with test flights)
I use a Samsung 7 Edge.
I am constantly getting compass errors in the app while flying, easily one every 30 seconds. They messages shows for 3 -5 seconds and is gone again. This does not affect flight at all, not when flying in normal or sport mode, not when using RTH (In RTH it shows most the time).
I have checked the flight logs, 13 - 14 satellites all the time, not a single error in any flight log for the past 5 days since I bought this MP.
I still fly it as per normal but I do not like getting this message all the time.
After days of researching, reading all forums, this one, Rc Groups and some others I still do not have an answer. I have checked the hardware inside, everything is connected, no broken wires on the GPS or compass. Drone has done 25 flights in total.
I have been flying and working with DJI products since the Phantom 1.
I recently bought a Mavic Pro. I know what causes magnetic interference, I do not do compass calibrations all the time, IMU and gimbal is calibrated, all firmware is up to date. I have taken off from different locations and the list goes on. Open spaces, built up area. I have many different DJI Drones, running N3 flight systems, naza fc. I think I have a good knowledge of the DJI Drones , software and hardware. (currently busy with a tethered drone running N3 with LB and a Zenmuse Z3, it will stay up in the air the whole day, busy with test flights)
I use a Samsung 7 Edge.
I am constantly getting compass errors in the app while flying, easily one every 30 seconds. They messages shows for 3 -5 seconds and is gone again. This does not affect flight at all, not when flying in normal or sport mode, not when using RTH (In RTH it shows most the time).
I have checked the flight logs, 13 - 14 satellites all the time, not a single error in any flight log for the past 5 days since I bought this MP.
I still fly it as per normal but I do not like getting this message all the time.