Mavic Pro gimbal issue, bumps and jumps when paning or turns

[curso88]

Hello

Someone have this problems with the Mavic gimbal?jumping or bumping when paning or quick turns. I observed that this problem is not present in the firmware 01.02.0900, but appears since 01.03.0000 and minimized but not fixed in the last 01.03.0200

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Best regards


Sent from my iPhone using MavicPilots

 

[pierce]

It's very well noticed when we stop the mavic.

 

[Mr Spock]

any updates on this? i got the same issue.

 

[curso88]

any updates on this? i got the same issue.

Not firmware problem. My Mavic was replaced by RMA because this issue

 

[Mr Spock]

Not firmware problem. My Mavic was replaced by RMA because this issue

can u pls elaborate? where was the issue exactly do u know?

 

[Mr Spock]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

any one knows if there is a fix for this in HW or FW?

 

[curso88]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

any one knows if there is a fix for this in HW or FW?

That firmware you have?

 

[Mr Spock]

01.03.0000 both on the Mavic and the RC and the app is 4.0.5 on Android 7 nugat. I have not upgraded the FW intentionally as i read a ton of issues are to be found on 01.05.0000.
The gimbal was working fine on 01.03.0000 i think... but for sure was fine before 01.03.0000 all of this time, i never crushed or anything. Is this is FW related then? If I upgrade to 01.05.0000 though will have a ton of other issues.
Can i go back to 01.02.0000?

 

[curso88]

01.03.0000 both on the Mavic and the RC and the app is 4.0.5 on Android 7 nugat. I have not upgraded the FW intentionally as i read a ton of issues are to be found on 01.05.0000.
The gimbal was working fine on 01.03.0000 all of this time, i never crushed or anything. Is this is FW related then?

Hi

Upgrade your firmware. If is a firmware bug, is caused by the the gimbal buffer. I installed now the last version without any problem. If your problem persist after FW upgrade please, contact with DJI because the Gimbal Controller Board does not work propely

 

[Mr Spock]

Hi

Upgrade your firmware. If is a firmware bug, is caused by the the gimbal buffer. I installed now the last version without any problem. If your problem persist after FW upgrade please, contact with DJI because the Gimbal Controller Board does not work propely

ok thank u for this!

 

[kona]

I have the same problem.

Are the firmware updates recent? My Mavic has never prompted me to upgrade my firmware. I've had it for a month.

 

[curso88]

I have the same problem.

Are the firmware updates recent? My Mavic has never prompted me to upgrade my firmware. I've had it for a month.

I had this problem in my Mavic and the firmware did not fix it. DJI replaced it for me.

 

[Mr Spock]

I had this problem in my Mavic and the firmware did not fix it. DJI replaced it for me.

slightly off topic. u happy with the replacement, is it brand new or referb?

 

[curso88]

slightly off topic. u happy with the replacement, is it brand new or referb?

Seems brand new. No gimbal jumps