Recently have begun having an intermittent issue on my smart controller display. Any ideas on what might be causing this black/white stripe image? Not sure if its a display issue or camera issue. Appreicate any thoughts or suggestions. 
Mavic2P Smart Controller Display Issue...or Camera issue?
- Thread starter sgrant64
- Start date
Looks like you have activated the overexposure warning... you can activate/deactivate it in the camera menu.
KB9Radio
Well-Known Member
As others have said, go in your camera settings and turn off the overexposure warning. While you're in there make sure the exposure is set on auto. Your "zebra stripes" should go away then.
Sometimes these settings change during updates. I had the obstacle avoidance turn off on me one time after an update.
Sometimes these settings change during updates. I had the obstacle avoidance turn off on me one time after an update.
