Mini 4 Pro Landing without my selecting

Falconeer · Sunday at 8:22 AM

My last two flights with my M4P, entered the "landing" command without it being selected (roughly 5 times) I can cancel it, but was wondering if anyone else has experienced this???

Not sure how to proceed, should I fully reset it to factory settings and reboot?

Any comments would be greatly appreciated !

~Kevin

Meta4 · Sunday at 9:54 AM

Falconeer said:
Not sure how to proceed, should I fully reset it to factory settings and reboot?

Not till you find out what causes it.
The recorded data from a flight where this happened might help understand what's going on.

There are a couple of options ...

1. Go to DJI Flight Log Viewer | Phantom Help
Follow the instructions there to upload your flight record from your phone or tablet.
That will give you a detailed report on the flight data.
Come back and post a link to the report it provides and someone might be able to analyse it and give you an understanding of the cause of the incident.
or
2. Just post the .txt file here
or
3. If you use Airdata, you can view the flight data on Airdata and post a link for the Airdata report

Falconeer · Sunday at 11:37 AM

Thanks for the tip. I'll check that out later this week (when I get back to my unit & post my findings for further help). I knew, I'd find someone who could help.

Falconeer · Sunday at 11:46 AM

Thanks for the tip. I'll check that out later on this week & post

Hey, do the seasoned folks on here feel about downloading DJI's Assistant 2? I have -3-drones?

M4P, Air3s & Avatar 2

akdrone · Sunday at 12:13 PM

Falconeer said:
Thanks for the tip. I'll check that out later on this week & post

Hey, do the seasoned folks on here feel about downloading DJI's Assistant 2? I have -3-drones?

M4P, Air3s & Avatar 2

It should absolutely be in your arsenal. Quite often when something ...some glitch...occurs that you can't figure out and you end up having to call DJI, the first thing they will suggest is to redo the firmware update via that app. Sometimes a firmware update is not available even though it should be so that's the solution too. Do you just have an avatar of the Avata? ;0)