MM with Litchi

[RogerDH]

When planning a mission using Litchi back when I had a Mavic Pro Platinum there was the ability to calculate above ground level height at each waypoint. With virtual sticks and Dronelink, is that (above ground level at waypoint) also a feature?

Yes, when setting an altitude, you can specify whether it's relative to the takeoff location, ground level, or mean sea level.

 

[Mitch]

Yes, when setting an altitude, you can specify whether it's relative to the takeoff location, ground level, or mean sea level.

Thanks Roger. Awesome! Trying to plan ahead as I now have a MA2 and need to figure out alternatives for waypoint missions if DJI doesn’t provide that ability in a future firmware/SDK release.

 

[egoldy]

Yes, when setting an altitude, you can specify whether it's relative to the takeoff location, ground level, or mean sea level.

Check this out:

 

[cadbob]

I've been doing this for about 4 yrs now

 

[maelstrom]

I've been doing this for about 4 yrs now

But not with the Mini as Litchi doesn’t support waypoint missions.