DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Mp2Zoom camera faces off left ,wont center on its own

DannyDieHard

Active Member
Joined
Mar 3, 2020
Messages
35
Reactions
3
Age
46
Location
Live Oak FL U.S.A
Ok like yall see in the picture , once I power up ,the whole start goes good. But cam does the up down right left and center off set to the left. I can center on the app with my finger I can point the cam where I want it to look ,it zooms in and out. it looks up down evrything good so I lock it in fpv when I fly , but let's say on active track it looks off set again like it thinks the center is that way so it's on a slanted angle flying and obviously obstacle avoidance wont work correctly since the front is looking right and the cam is looking left. I have turned gimbal screws and plate to all 3 positions and still the same thing. I bought this mavic and it wasnt flying because of error 200, I changed gimbal and flex cable amd ribbon cable and it flies but it just won't recenter. I'm downloading the assistant to try and calibrate but how can I reflash it?
 

Attachments

  • 20200312_173932.jpg
    20200312_173932.jpg
    924.9 KB · Views: 38
Last edited:
Have you try it with remote control?

click on 3 dots and try to calibrate?
 

Attachments

  • A581B5B2-E4EA-4DC7-9FF0-41B393CBECB3.jpeg
    A581B5B2-E4EA-4DC7-9FF0-41B393CBECB3.jpeg
    476 KB · Views: 26
  • 7C113DFD-B41A-4041-8164-A17CA7F3D63A.jpeg
    7C113DFD-B41A-4041-8164-A17CA7F3D63A.jpeg
    430.8 KB · Views: 26
  • 4DFF1F17-F178-4F21-A733-84D7977750A9.jpeg
    4DFF1F17-F178-4F21-A733-84D7977750A9.jpeg
    1.3 MB · Views: 25
  • 8E8B8D1E-B7AA-499B-A653-15E919B7FAD9.jpeg
    8E8B8D1E-B7AA-499B-A653-15E919B7FAD9.jpeg
    433 KB · Views: 25
Have you try it with remote control?

click on 3 dots and try to calibrate?


Yes I have tried it all , except the assistant, I cant seem to find the one for the MP2Zoom ,
But yeah I tried calibrating with the mavic upside down. Facing down side ways I tried evrything I read on some ones post here about it but still hasnt figured how to fix it. Who else is having this issue ?
 
Yes I have tried it all , except the assistant, I cant seem to find the one for the MP2Zoom ,
But yeah I tried calibrating with the mavic upside down. Facing down side ways I tried evrything I read on some ones post here about it but still hasnt figured how to fix it. Who else is having this issue ?
Try this page:
 
Ok I got the assistant finally downloaded but now while trying to figure out the camera facing forward I think I must have changed a setting which stops the camera from zooming in and out with the dial and it only like auto focus's slot like evry minute it it zooms in a little and back till it focuses. Is there a setting that does that ? Cause I cant zoom in with the app either it just keeps focus thing on it's own
And the assistant when I plug in it tells me the firmware is not right and needs to update I go to update and it fails the updates and when I tried to calibrate the gimbal and camera it stays stuck on the instructions step 4 of 4 amd the start calibrating button doesnt light up for me to click it. The most advanced drone I have and the one with the most technical problems
Try this page:
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Members online

Forum statistics

Threads
130,599
Messages
1,554,254
Members
159,604
Latest member
wlochaty