Name this connector

[Will042082]

What type of connection is this? This is the Mavic AIR board and the antenna cable that runs to it and connects to the board.

I purchased u.fl and that’s definitely not it. Then I got mmcx and it appears to fit, but my male end has a pin and it appears the boards female end does as well.

Can someone PLEASE confirm what type of cable/connector I need to connect to the board.

 

[1275mini]

Its an aerial connection eBay search for frsky aerialsyou will find loads of them

 

[Will042082]

So the stock DJI antenna connects to the main board via an aerial connection? Just confirming I’m understanding you right.

 

[1275mini]

Have a look here
20 X FrSky 2.4G Receiver Antenna generation 4 RF113 (smaller) IPEX port | eBay

 

[Will042082]

Thank you. Now I need to find them with sma connectors.

 

[Will042082]

Have a look here
20 X FrSky 2.4G Receiver Antenna generation 4 RF113 (smaller) IPEX port | eBay

Is that connector called a ufl iPex? I find so much of the cables I already have and just want to make sure 3rd times a charm when ordering.

For reference what I’m looking for is a couple of pairs of 6-12” SMA to what appears to be a FR113 IPEX port based on your link above. The board connection this needs to connect with is here.

The stock antenna that currently connects to it is this

 

[Will042082]

Just updating the threads I started. I’m pretty confident the exact connector is a u.fl MHF4 which is .81mm. I’ve ordered a few and will update to confirm.