Never 100 %

[mavic53]

When updating via GO 4 it never gets to 100% stays at 99% for ever. Shutting down and starting up confirms update done. In UK this is.

 

[Mavic 57]

I use Android and mine did the same. Was not confident it updated correctly, so used DJI Assistant, whick took 5 minutes for each item Mavic, RC & Goggles.

I think my problem is I have to power off and on my Tab S2 before the G04 app connects to the RC. When its updating, the RC reboots and I think it then fails to reconnect at around 99%. Killing the Go4 program to get out.

In future only going to use Assistant, to make sure update was completed 100%.

 

[Robbyg]

When updating via GO 4 it never gets to 100% stays at 99% for ever. Shutting down and starting up confirms update done. In UK this is.

Sounds about right for half the people. Something is just not right in the update system. It gets to 99% then finishes but in many cases it does not report back to the software that it has finished.

Rob