Panoramas Stalling

[VenomXts]

Ok, I have owned a Air 2 and even in high winds never really had a panorama stall out on me.... I got a Mavic 3 and early on had them stall all the time not even in high wind (returned it for several reasons) but always figured the bigger camera had a harder time stabilizing for the panos... Now im running a air2s and not that many issues with it in the last few weeks... but tonight I had panos's stalling out on me at 14% constantly at 400 ft with no strong wind warning... I am wondering if its a issue with the gimble I dropped lower and it finished them but took along time on a few.

Thoughts?

 

[itallica]

I noticed the same thing with my air2s last week.

I was up high and there was a breeze - I assumed it was wind.

The next time I power things up I'll shoot a panorama right after takeoff and observe what is going on. I was using the RC Pro controller, which should absolutely not be the problem. But I can test that, too by using the old controller.

Good luck!

 

[edcMavicPilots]

I was having a stalling problem with the Mavic 3 a couple of months ago on panos, especially on wide. I haven't noticed it for awhile though. I just figured it was fixed in one of the firmware updates.

 

[Robert Prior]

I've had something similar happen with my Mavic 2 Pro. Not very often (3 times in 20ish hours of flying), but annoying. I've found that landing, powering off the drone and controller, and restarting fixes the problem.

Possibly restarting only the drone would solve it, but every time it happened I was in a situation where getting the shots was more important than diagnosing the problem, so I just powered everything off and restarted.

Happened with both the regular controller using an iPad and the Smart Controller (which runs on Android), for what that's worth.